Beechwood Helium Balloons

Helium Balloon filling instructions:

1. When inflating balloons, do not overfill balloons. If the bottom of the balloon begins to become pear shaped it is overfilled. The bottom of the balloon should remain rounded.

2. Overfilling balloons will result in less balloons being inflated than you expected.

Helium Regulator / Filler Instructions:

1. Screw the male threads of the valve into the female threads of the helium cylinder. Do not use a wrench.

2. Open helium valve all the way open.

3. Put the balloon on the end of the flex tip, tilt the flex tip and fill balloon as described above.

4. When finished:  a. Close helium valve. b. Bleed valve by tilting flex tip. c. Remove valve.

Back to Helium